Application and selection points of stainless steel hydraulic hinge

2020-01-13

Stainless steel hydraulic hinges are more common in daily life and also play a big role. Now I will talk about the use and selection points of stainless steel hydraulic hinges for you. I hope it will be helpful to everyone.


  Uses of stainless steel hydraulic hinges


  The advantage of stainless steel hydraulic hinge is that the soft and silent feeling makes the home feel warmer and more comfortable. The main feature of stainless steel hydraulic hinge is that the door can slowly close itself within 4 to 6 seconds when it is closed, and the number of openings and closings can reach more than 50,000 times. And can withstand the pressure of destructive force is still not deflated and oil leakage.


  Stainless steel hydraulic hinge is suitable for door connection of furniture such as wardrobes, bookcases, floor cabinets, TV cabinets, cabinets, wine cabinets, storage cabinets and other furniture. The stainless steel hydraulic hinge relies on a new technology to adapt to the closing speed of the door. The product uses hydraulic buffering technology to make the door slowly close at 60 ° on its own, reducing the impact force and forming a comfortable effect when closing, even if the door is closed with force Close, guarantee perfect and soft movement.


  Assembling buffer hinges makes the furniture more upscale, reduces the impact force and forms a comfortable effect when closed, and ensures that maintenance is not required even under long-term use.

stainless steel hydraulic hinge


  Selection points of stainless steel hydraulic hinge


  1. Surface: See if the surface material of the product is flat. If you see scratches and deformation, it is produced from waste (cuttings). This kind of hinge has an unsightly appearance, leaving your furniture without grades.


  2.Hydraulic performance: Everyone knows that the key of stainless steel hydraulic hinge is to act as a switch, so this point is very important. The key is the damper of stainless steel hydraulic hinge, and the assembly of rivets. The damper mainly depends on whether there is noise during opening and closing. If there is noise, it is a poor quality product, and whether the round speed is uniform. Is there any looseness in the hinge cup? If there is looseness, it proves that the rivets are not tightly riveted and easily fall off. Check the cup several times to see the indentation in the cup is not obvious. If it is obvious, there is a problem with the thickness of the cup material and it is easy to damage.


  3. Screws: General stainless steel hydraulic hinges come with two screws, both of which are adjustment screws, up and down adjustment screws, front and back adjustment screws, and some new hinges also have left and right adjustment screws, which is now called the three-dimensional adjustment hinge, which usually has two There are enough adjustment stations.


  4. Tip: Use a screwdriver to adjust the upper and lower adjustment screws three or four times with a point force, and then remove the screws to see if the indentation of the hinge arm is damaged, because the hinge arm is formed of iron material, no screws. It is so hard and easy to wear, and because the precision of the factory tapping is not enough, it is easy to slip or not screw. The forward and backward adjustment screws are also tested.


  The above is an introduction to the uses and selection points of stainless steel hydraulic hinges. I hope everyone will understand the uses and selection points of stainless steel hydraulic hinges, which will be helpful to everyone.


Get the latest price? We will reply as soon as possible (within 12 hours)